telefon: +49 (0) 6135 931069 telefax: +49 (0) 6135 931070 www.peak-electronics.de info@peak-electronics.de P6CG-XXXXE 1kv isolated 1 w re gulated single output sip7 available inputs: 5, 12 and 24 vdc available outputs: 3.0, 3.3, 5, 9, and 12 vdc other specifications please enquire. electrical specifications (typical at + 25 c, nominal input voltage, ra ted output current unless otherwise specified) input specifications voltage range +/- 10 % filter capacitors isolation specifications rated voltage 1000 vdc resistance 10 9 ohm capacitance 60 pf typ. output specifications voltage accuracy +/- 2 % ripple and noise (at 20 mhz bw) 50 mv p-p, max. short circuit protection short term line voltage regulation +/- 0,5 % max ., (3.3 vdc output +/- 1 % max ) load voltage regulation +/- 0,5 % typ., +/- 1 % max. (no load to full load) temperature coefficient +/- 0,02 % / c general specifications efficiency 58 % to 66 % switching frequency 70 khz, typ. environmental specifications operating temperature (ambient) - 40 c to + 85 c storage temperature - 55 c to + 125 c derating see graph humidity up to 90 %, non condensing cooling free air convection physical characteristics dimensions sip 19,50 x 7,20 x 9,50 mm 0,76 x 0,28 x 0,37 inches weight 2,7 g case material non conductive black plastic examples of partnumbers/modelcode part no. input voltage (vdc) input current no load input current full load output voltage (vdc) output current (max. ma) efficiency full load (% typ.) p6cg-0503e 5 20 200 3 200 60 p6cg-053r3e 5 22 220 3,3 200 60 p6cg-054r8e 5 25 318 4,85 200 61 p6cg-0505e 5 28 312 5 200 63 p6cg-0509e 5 32 312 9 111 64 p6cg-0512e 5 45 312 12 84 64 p6cg-1203e 12 15 83 3 200 60 p6cg-123r3e 12 15 92 3,3 200 60 p6cg-124r8e 12 15 133 4,85 200 61 p6cg-1205e 12 16 130 5 200 64 p6cg-1209e 12 16 123 9 111 68 p6cg-1212e 12 22 123 12 84 68 p6cg-2403e 24 8 43 3 200 58 p6cg-243r3e 24 8 47 3,3 200 58 p6cg-244r8e 24 7 64 4,85 200 63 p6cg-2405e 24 7 64 5 200 65 p6cg-2409e 24 10 63 9 111 66 p6cg-2412e 24 10 63 12 84 66
P6CG-XXXXE 1kv isolated 1 w re gulated single output sip7 dimensions peak modelcode datecode 12 45 6 7 printing 7.20 (0.28) 19.50 (0.76) 10.00 (0.39) 15.20 (0.60) 2.54 (0.10) 0.50 (0.02) 3.05 (0.12) 0.50 (0.02) 2.00 (0.08) 0.50 (0.02) 0.25 (0.01) all dimensions are typical in millimeters (inches). tolerance x.xx = +/- 0.30 (+/- 0.01) specification may change without notice. derating graph and pinning safe operating area temperature derating graph ambient temperature c 0.60 w 1.00 w 1.50 w - 40 0 40 80 100 85 output 0.75 w 1.25 w pin connection # single 1 + v input 2 - v input 4 - v output 5 omitted 6 + v output 7 omitted if specification prior to this data sheet is needed, please enquire. specification can be changed without not ice. copyright peak electronics gmb h rev:a / 06.2003
|
